Dindi Group
Structural Checks to Carry Out Before Renovation
Restoration and Renovation

Structural Checks to Carry Out Before Renovation

Dindi Group
· Updated: 3 min read

Key Takeaways

  • —45-degree and horizontal wall cracks should be taken seriously and may require assessment by a structural engineer.
  • —Kyrenia's humid, salty climate makes rising damp from foundations a common problem in older buildings.
  • —Flat roof waterproofing generally lasts around 15–20 years; roofs exceeding this period should be inspected.
  • —Electrical installations from before 1990 were generally not designed to handle today's electrical loads.
  • —Moisture-related beam decay in wooden intermediate floors is a serious risk that can be difficult to detect visually.

“We opened the wall and a 40-year-old water pipe came out” — you’ll hear this sentence at least once from nearly every contractor doing renovations in Kyrenia. It’s not possible to prevent all surprises, but it is possible to catch most of them in advance. Here are the points that must be checked before starting work.

1. Load-bearing system: what do the cracks tell you?

Not every crack in a wall is alarming, but some types of cracks should be taken seriously. Cracks at a 45-degree angle, spreading from the corners, generally point to foundation settlement or ground movement. Horizontal cracks, on the other hand, can indicate a problem with the wall’s load-bearing capacity. If there is concrete spalling on columns and beams or exposed reinforcement, a report from a structural engineer is essential at this point — these kinds of problems can’t be covered up with a cosmetic coat of paint; the result of the report often also determines the answer to the question of renovating the house or rebuilding from scratch.

2. Moisture and dampness: Kyrenia’s most insidious enemy

North Cyprus’s humid climate and the salty air in areas close to the sea can turn dampness into a chronic problem in old buildings. Especially on ground floors, rising damp from the foundation (capillarity) is frequently seen — salt stains at the base of walls, bulging plaster or peeling paint are typical signs of this problem. We often encounter this situation in old buildings along the Karaoğlanoğlu and Alsancak coastal strip.

How do you find the source of the moisture?

Before starting renovation, the source of the moisture (foundation dampness, a roof leak, or a plumbing leak) needs to be clearly identified; a superficial intervention made without finding the source comes back within a few months.

3. Roof and waterproofing

In old Kyrenia houses, the roof is generally one of two types: a flat concrete terrace roof or a pitched tiled roof. On flat roofs, the lifespan of the waterproofing membrane is generally around 15-20 years; on a roof that has exceeded this period, it makes sense to check the waterproofing even if there’s no visible problem.

What to look for on tiled roofs?

On tiled roofs, broken/slipped tiles and moisture damage and rot in the wooden beams in the attic space should be checked.

4. Electrical installation: old cable, new load

In many homes built before 1990, the electrical installation wasn’t designed for today’s multiple-load needs such as air conditioners, electric ovens, and washing machines/dishwashers. Cable cross-sections may be insufficient, and there may be no grounding line at all. Having at least the main panel and grounding line checked by an electrical engineer or specialist electrician as part of the renovation is the cheapest way to prevent fire risk down the line.

5. Plumbing and clay pipe lines

Old iron pipes rust from the inside over time, which both reduces water pressure and affects the color/taste of the water. The location of old clay pipe (künk) lines laid in the garden or courtyard is generally forgotten; identifying the location of existing lines before digging costs far less than stopping the job midway.

6. Floor and flooring

If there is slope, subsidence or hollow sound on the floor (a feeling of emptiness when stepped on), there may be a problem with the fill or flooring joists beneath. Especially in old buildings with wooden intermediate floors, joist rot due to moisture can be seen — this is a serious safety issue that isn’t easily noticed by eye.

7. Window-door joinery and thermal insulation

Whether to replace the original wooden joinery in stone houses is an important decision both aesthetically and in terms of thermal insulation. Remember that there may be restrictions on this in registered buildings, and that a change may require a restoration permit.

Note: In cases requiring structural intervention (load-bearing system, roof structure, adding a floor), a permit from the relevant municipality may need to be obtained; the process on this can vary from municipality to municipality, and the relevant institution should be consulted for current information.

Restoration and Renovation

Frequently Asked Questions

Who should carry out an inspection before renovation?+

A civil engineer or experienced contractor should assess the structural system and general condition; if there is any concern about the structure, a structural engineer's report should be requested.

Is every crack in a wall dangerous?+

No. Small superficial plaster cracks are generally normal; however, 45-degree, wide, or horizontal cracks require professional assessment.

Is it possible to solve a moisture problem permanently?+

Yes, if the source is correctly identified—foundation damp, roof leaks, and plumbing leaks each require different solutions, and intervention without finding the source will not be permanent.